In this article I will show how to construct a Faraday flashlight circuit using only a coil/magnet assembly which requires no battery. It’s not free energy, but it converts oscillatory motion to electricity, which can power the flashlight for a couple of minutes. This flashlight will be useful in emergency situations where no access to […]
Newly Updated Circuit Projects:
Automatic Voltage Stabilizer Circuit for TV sets and Refrigerator
Here we will study the design of a simple automatic mains AC voltage stabilizer which can be applied for safeguarding appliances like TV and refrigerators from fluctuating voltages. A voltage stabilizer is a device which is designed to sense inappropriate voltage fluctuations in AC mains supply inputs, and correct them to produce a stabilized voltage for the […]
Home EMF Radiation Protector Neutralizer Circuit
The post investigates a circuit which can be used for negating or neutralizing the everlasting harmful low frequency EMFs created from our mains power line in our homes. The idea was requested by one of the interested readers of this blog. Technical Specifications I’m trying to find a device or plans to build a device […]
High Current Adjustable Switching Power Supply Circuit using L296 IC
The L296 is a monolithic power switching regulator IC, incorporating an adjustable output voltage, current limiting, and thermal shutdown. Due to these features, this IC has become a favorite option for a many different applications such as bench power supplies, battery chargers, and motor controllers. The IC L296 will be used in this circuit to […]
Non Contact AC Phase Detector Circuit [Tested]
The circuit discussed in this article is of a non-contact mains AC field detector which displays the presence of a mains AC field from a distance of more an 6 inches. Locating Fault in AC Lines without Physical Contact The circuit can be used for locating faults in house wiring without the need of making […]
Simple Frequency Meter Circuits – Analogue Designs
The following simple analogue frequency meter circuits can be used for measuring frequencies which may be either sine wave or square wave. The input frequency which is to be measured must be at least 25 mV RMS, for optimal detection and measurement. The design facilitates a relatively wide range of frequency measurement, right from 10 […]