In this post I have explained a few DC motor protection circuit from harmful conditions like over voltage and under voltage situations, over current, overload etc.. DC motor failures are commonly experienced by many of the users, especially in places where the relevant motor is run for many hours a day. Replacing motor parts or […]
Over
Emergency LED Lamp Circuit with Battery Overcharge Protection
The following LED emergency light with battery over charge protection feature circuit was designed by me in response to the request sent by PP. Main Features In this article I have explained an LED emergency light circuit with advanced features such as, Using Transistors only The following design of the proposed day/night automatic emergency LED […]
Arduino based Battery Over Discharge Protection Circuit
In this post, I will show how to construct a over discharge protection circuit for 12v battery using Arduino which can protect 12V SLA battery against over discharge, and also protect the connected load from over voltage in case of overcharged battery is connected. Understanding Battery Charge/Discharge Rates All the batteries have natural decline, […]
Over Voltage Protection for Automotive Load Dump
In this post I have explained an over voltage cut-off protection circuit in the form of automotive dump load for protecting sensitive and sophisticated modern automotive electronics from transient DC electrical spikes emanating in vehicle electrical. Transient bus voltages are a significant risk factor to integrated circuits. The maximum breakdown voltage that an integrated circuit […]
Motorcycle Low Battery Over Discharge Protector Circuit
A simple motorcycle battery over discharge protector circuit is explained in the following post. The circuit will prevent the battery from over-discharging by the motorcycle headlamp whenever the mo-bike alternator is not enabled or is idling in the neutral mode in which case the battery is normally subjected to excess loads via the headlamp bulb. […]
Over Current Cut-off Power Supply Using Arduino
In this post I will show how to construct a battery eliminator / DC variable power supply which will automatically cut-off the supply, if the current flow through the load exceeds the preset threshold level. Main Technical Features The proposed over current cut-off power supply circuit using Arduino has 16 X 2 LCD display, which is […]