In this post I have explained an automatic submersible pump start, stop circuit with dry run protection in order to implement an automatic ON/OFF switching of the motor in response to the high/low water levels of the overhead tank. Circuit Concept In one of the previous posts I have explained a similar concept which also […]
Newly Updated Circuit Projects:
Motorcycle Regulator, Rectifier Tester Circuit
The motorcycle regulator, rectifier tester circuit presented here can be used to test a 6-wire shunt type regulator-rectifiers for a 3-phase charging system of motorcycles. These reg./rectifiers (RR-units) are usually sealed with epoxy and it is considered difficult to find out if the unit is faulty or not. Designed and Written by: Abu-Hafss As the […]
Remote Controlled Fish Feeder Circuit – Solenoid Controlled
In this design a solenoid is operated using an IR remote control, which in turn toggles the fish feeder mechanism. In this article I have explained how to make a simple infrared controlled fish feeder circuit. The idea was requested by Mr. Harishvar. Technical Specifications I just want a circuit which should turn on when […]
How to Connect a TSOP1738 IR Sensor
TSOP17XX series devices are advanced infrared sensors having a specified center frequency of operation which makes their detection extremely reliable and foolproof. In this post I have explained how to connect a TSOP series infrared sensor and use it for a specified IR remote control operations. TSOP IR Sensor Specifications A TSOP series of IR […]
2 Simple Washing Machine Circuits Explained
In this post I have explained how to make a couple of simple washing machines using a bidirectional single motor with timer and a simple version using cam shaft mechanism, cheaply. In the first design we use a bidirectional, alternately rotating clockwise and counter clockwise with a pause in the middle: Audio/Video Representation Circuit Working […]
Borewell Motor Pump Starter Controller Circuit
In this post I have explained a circuit which controls a submersible borewell motor by operating its red (Start) and green (Stop) buttons, in response to low level, high level water conditions, and also in a condition where the motor may experience a dry run situation. The idea was requested by Mr. Vamsi. Automatic Start/Stop […]