The article provides a detailed explanation regarding the various voltage regulator wiring configurations used in motorcycles. The article was submitted by Mr. Abu-Hafss. Technical Specifications After working on different voltage regulators, I feel to share my findings on your blog so that other people may also get benefit. Please insert the diagrams appropriately in the […]
Newly Updated Circuit Projects:
How to Interface Servo motors with Arduino
In this post I have explained what servo motor is, how it functions, how to interface with microcontroller and what make this motor special from other motors. Being an electronics enthusiast we would have come across many kinds of motors, here we are going to take a look at special type of motor called servo […]
Two Pipe Water Pump Valve Controller Circuit
In this article I have explained how to control a two pipe submersible pump valve to ensure that the pipe bringing in the municipal water is always given the main preference to the bore-well water source. The circuit is also equipped with a tank overflow cut-off feature. The idea was requested by Mr. Prashant. Circuit […]
Arduino Modified Sine Wave Inverter Circuit
In this post I will show how to construct a modified sine wave inverter using Arduino. We will explore the methodology of the proposed sine wave inverter and finally, we will take a look at simulated output of this inverter. By Difference Between Squarewave and Modified Squarewave Inverter Inverters saved us from short term power […]
Regenerative Braking System in Automobiles (Circuit Diagram)
The following regenerative electricity generator circuit in cars and motorcycles was inspired from the oscillating dolls, and idols inside vehicles which may be seen constantly swaying and moving due to the vehicle’s uneven motion or whenever brakes are applied. How Energy is Wasted in Vehicles During Braking Whenever a vehicle is stopped or braked, a […]
Automatic Inverter Fan Switch ON while Charging and Inverting Modes
In this post I have explained a simple method of automatically switching ON an inverter fan whenever the unit is operating in the charging mode or inverter mode, in order to ensure optimum cooling of the internal power devices. The idea was requested by Mr. Sudip Bepary. Circuit Objectives and Requirements I have just bought […]