A water level indicator is an electronic circuit which indicates the various levels of water inside a tank. This happens when rising or dropping water levels come in contact with the respective water sensors arranged step wise inside the water tank at different depths. In this post I have explained 2 interesting ways to make […]
Water
How to Build an Ozone Water/Air Sterilizer Circuit – Disinfecting Water with Ozone Power
We are all familiar with thundering and lightning during stormy weathers and know how the effect is responsible of producing a lot of ozone and negative ions in the atmosphere. The same concept has been employed in the proposed water and air sterilizer circuit. Properties of Ozone Ozone is a pale blue gas having a […]
Ultraviolet UV Water Filter/Purifier Circuit at Home
The post describes an easy method of making an ultra violet water purifier circuit using ordinary electronic components. How UV is Used as Germicidal Ultraviolet germicidal irradiation (UVGI) is a water treatment method which employs UV or ultraviolet light rays in the range of short wavelength in order to eliminate the present pathogens and microorganisms. The technology involves […]
Car Tank Water Sensor Circuit
In this article I have explained a simple car tank water sensor alarm circuit using IC 555 and a pulsating signal on the sensing probes to pevent corrosion on the probes. The idea was requested by Mr. Peter. Circuit Objectives and Requirements The Design Referring to the figure below, the proposed car tank water sensor […]
Solar Water Heater Circuit with Battery Charger
The proposed solar water heater with battery charger controller circuit explains a simple method of utilizing the excess solar energy from a solar panel for heating water in water tanks or swimming pools or poultry egg chambers. Normally the circuit also functions like an automatic solar battery charger, and simultaneously powers domestic electrical appliances. Understanding Solar Charging […]
Water/Coffee Dispenser Motor Circuit
In this article I have explained a protection circuit which may be used for preventing a “dry run” situation in mini coffee dispenser motor pumps, by sensing the slight difference in its wet and dry current consumption levels. The idea was requested by Mr. Ken Adler. Technical Specifications I read with great interest your post titled, […]