This project I will explain how we can control a relay remotely using a SIM card and a normal mobile phone, with help of Arduino and a GSM module. The relay can be turned ON or OFF by sending an SMS or by making a phone call to the SIM card placed inside the GSM […]
Control
Incubator Using Arduino with Automatic Temperature and Humidity control
In this post I will show how to construct an incubator using Arduino which can self-regulate its temperature and humidity. This project was suggested by Mr. Imran yousaf who is an avid reader of this website. Introduction This project was designed as per the suggestions from Mr. Imran, but some additional modification is done to […]
Touch Volume Control Circuit
This touch volume control circuit has two touch pads which enable the user to increase or decrease the volume of an audio amplifier simply by touching the relevant touch pads. The advantages of this solid-state volume control are: very long life due to the absence of any wear and tear, quick and easy finger touch […]
Simple Tone Control Circuits
Tone control circuits are basically filter circuits which are used to filter audio frequency signals so that only the desired range of frequencies are allowed to pass to the amplifier and the loudspeakers. This enables the listener to customize the music output with either a high level of low frequency content through bass boost, or […]
Wireless Servo Motor Control Using 2.4 GHz communication link
In this post I will show how to construct a wireless servo motor circuit which can control 6 servo motors wirelessly on 2.4 GHz communication link. Introduction The project is divided into two parts: a transmitter with 6 potentiometers and a receiver circuit with 6 servo motors. The remote has 6 potentiometers to control 6 […]
2.4 GHz 10 Channel Remote Control Switch Circuit
In this post I will show how to construct a 10 channel remote control switch circuit based on ISM (industrial, Scientific and Medical) band. Introduction The ISM band is operated at 2.4 GHz, which can be used without licensing with reasonable power output. The proposed project is general purpose ON/OFF wireless switch, which can be […]





