The proposed circuit was requested by one of the avid readers of my blog. It is a low battery warning indicator circuit using op amp IC 741 and can be used for monitoring a particular low battery voltage threshold. Circuit Operation The circuit may be understood with the following points: The entire configuration is wired […]
Newly Updated Circuit Projects:
TPS24710/11/12/13 Hot-Swap Controller Circuit Explained
When we talk about hot-swap controllers, it is basically an electronic device or integrated circuit (IC) that allows you to the insert or/and remove circuit boards, modules or parts within an active system without having you to switch off the system. It regulates the surge current whenever a component is installed and protects from short […]
High Current Transformerless Power Supply Circuit
The simple configuration of a transformerless power supply circuit presented below is able to provide high current at any assigned fixed voltage level. The idea seems to have solved the problem of deriving high current from capacitive power supplies which earlier seemed a difficult proposition. Introduction I have discussed a few transformerless power supply circuits […]
Adjustable 0-100V 50 Amp SMPS Circuit
The high power adjustable switching power supply is perfect for the purpose of laboratory work. The topology used to design the system is switching topology – half controlled bridge. Written and Submitted by: Dhrubajyoti Biswas Warning: The following circuit design works with a direct 220 V Mains AC without any isolation at the input side, […]
Single Phase Variable Frequency Drive VFD Circuit
In this post I have explained a single phase variable frequency drive circuit or a VFD circuit for controlling AC motor sped without affecting their operational specifications. What is a VFD Motors and other similar inductive loads specifically do not “like” operating with frequencies that might be not within their manufacturing specs, and tend to […]
Step-Down Adjustable Voltage, Current Regulator Circuit using LM2673
The LM2673 series of regulators is a collection of monolithic integrated circuits that are designed to provide all the active functions needed for making a step-down, or buck converter, switching regulator circuit. This means that they are capable of driving loads of up to 3 amps while maintaining excellent line and load regulation characteristics. One […]