In this article I have explained a 5 assorted power bank circuits using 1.5V cell and 3.7V Li-ion cell which can be built by any individual for their personal emergency cellphone charging functionality. The idea was requested by Mr. Irfan What is a Power Bank Power bank is a battery pack which is used to […]
Newly Updated Circuit Projects:
Simple Motorcycle Security Alarm Circuit
In this article I have explained a simple motorcycle ant-theft security alarm circuit using a tilt switch and a TTP223 touch switch. The circuit was requested by Mr. Sergei, as given below. Design Request and Specifications I am a motorcyclist and I would like to ask you to design a simple and cheap alarm system […]
How to Use TTP223 Capacitive Touch Switch Module [Pinouts Explained]
In this article I have explained how to connect and use the TTP223 capacitive touch switch module. These modules work using 2.5V to 5V. They are all pre-debounced, all you need is to provide the DC supply across the VC and GND terminals, and you get an output in the middle. So it is really […]
Day/Night Triggered Automatic Door Lock Circuit
In this post I have explained a simple day, night triggered automatic door lock circuit, which can be used for autonomously unlocking a kennel door during day break, and locking it when night sets in. The idea was requested by an avid reader of this blog, Mr. Norman, as given below. Design Request and Specifications […]
Flashlight Activated Burglar Alarm Circuit
This flashlight triggered burglar alarm circuit will instantly switch ON an alarm as soon as it detects light from the burglar’s torch or flashlight. Burglars and thieves normally set out to steal or rob during nights, when it is completely dark, and depend on a flashlight to investigate the area. Our circuit is setup and […]
Mains High Low Voltage Protection Circuit with Delay Monitor
In this post I have explained an upgraded version of my previous mains 220V/120V high-low voltage cut off protection circuit which now includes a delayed restoration of power for the load with 3 LED power status indicators. The idea was requested by one of the dedicated members of this website. Circuit Objectives and Requirements Main […]