An FET Current Source is one special type of active circuit that is using a Field Effect Transistor for giving a steady and constant current into a circuit. We are doing this because sometimes we want that current should not change, it should remain fixed and stable. Why We Need Constant Current Now you may […]
Newly Updated Circuit Projects:
IC IR2111 H-Bridge Inverter Circuit with Shut Down
This circuit is basically a H bridge inverter where two IC IR2111 are working for driving four MOSFETs that are connected in H bridge way. We also see that there is a overload and over current shut down using BC547 small transistors. So what happens is that we can run a load with AC waveform […]
How to Connect Resistors in Series and Parallel
There are three ways to interconnect resistors: series, parallel and in combination of series/parallel. When resistors are joined in series, the current passing via one resistor also passes through the next. When resistors are joined in parallel, they are wired across each other, resulting in the same voltage across each resistor. When resistors are connected […]
Modified Inverter Circuits using 4049, 4093 ICs
The following inverter designs are unique modified sine wave inverter concepts designed me. The entire unit along with the oscillator stage and the output stage can be easily built by any electronic enthusiast at home. The present designed will be easily able to support 500 VA of output load. Let’s try to understand the circuit […]
Adjustable RMS Modified Inverter Circuit using BJTs
A very interesting circuit of a RMS controlled modified sine wave inverter is discussed in this article which incorporates just ordinary transistors for the proposed implementations. The use of transistors typically makes the circuit easier to understand and more friendly with the new electronic enthusiasts. The inclusion of a PWM control in the circuit makes […]
Hen House Automatic Door Controller Circuit
In this article I have explained an automatic door mechanism circuit that responds to the ambient light conditions by keeping the door open during day time and closed during night. Here the application is used for operating a hen house door. The idea was requested by Mr. Gavin Sweet Technical Specifications I have a project […]





