Implementing P-channel MOSFETs in an H-bridge circuit may look easy and enticing, however it may require some stringent calculations and parameters for achieving an optimal response. P-channel MOSFETs are usually implemented for load ON/OFF switching. The ease-of-use of P-channel options on the high side allows them to be very convenient for applications like Low-Voltage Drives […]
Applications
Diodes: Working, How to Use, Applications
It’s John Ambrose Fleming (1849-1945), a British engineer, who invented the first diode in 1904, in the form of an electron tube. Later, with the development of semiconductor technology, the diode became a dipole consisting of two substrates: one, rich in free electrons, and of type N, the other deficient in electrons, and of type […]
LM567 Tone Decoder IC Features, Datasheet and Applications
In this post I have explained the main specifications, datasheet and working principle of the IC LM567, which is a precise phase-locked loop with synchronous AM lock detection and power output device. In simpler terms the IC LM567 IC is a tone decoder chip which is designed basically for recognizing a specified frequency band, and […]
Op amp IC 741 Datasheet, Pinout, Applications
The 741 is a popular general-purpose operational amplifier (op-amp) IC that was introduced by Fairchild Semiconductor in 1968. It has since become one of the most widely used op-amp ICs in the world, due to its versatility and low cost. Below is a typical datasheet for the IC 741: General Specifications: Pinout Configuration: The pinout […]
IC 4063 Datasheet, Pinout Working, Applications
The IC 4063 is a CMOS-based 4-bit magnitude comparator IC that can compare two 4-bit binary or BCD numbers and determine which one is greater than or equal to the other. It operates on a supply voltage range of 3V to 18V and is compatible with TTL logic levels. Features: Some of the key features […]
LM311 Datasheet, Circuit Applications
The LM311 is a versatile, fast voltage comparator with multiple capabilities. Its output stage is “open collector” and “open emitter,” allowing for various configurations. It can directly control relays and its output can be compatible with several logics, including TTL. Technical Specifications and Datasheet Here are some of the technical specifications of the LM311 comparator […]