A DC cell phone or mobile phone charger is a device which charges a cellphone from an available DC supply source. The device converts the unregulated DC source into a constant current and constant voltage output which becomes safe for any mobile phone charging. In this article I have explained how to build DC to […]
Phone
How to Illuminate 1 Watt LEDs with Cell Phone Charger
Nowadays probably all of us have a spare cell phone charger lying idle in our cupboards or table drawers……so wouldn’t it be a great idea if we could employ it like a super bright 1 watt LED driver and illuminate our room with white cool moon light. Circuit Concept As we all know that a 1 watt […]
Cell Phone Emergency Charger Pack using Ni-Cd Batteries
In this post I have explained the construction of a simple emergency charger pack using Nicket Cadmium (Ni-Cd) batteries for your cellphones and smart phones for emergency charging of your cellphone, so that next time you are never stuck on a highway with a full discharged dead cellphone battery. Circuit Concept It often happens, our […]
Timer Based Cell Phone Charger Circuit
A simple cell phone charger with timer circuit is presented in the following article, which could be used for charging a given Mobile phone for a specified predetermined length of time. The idea was requested by Mr. Saad. Circuit Objectives and Requirements Could you design me this charger circuit ? Input 230V 60 Hz, and the […]
Cell Phone Call Alert Security Circuit
This circuit will give call back alerts in the form of blank calls on your cell phone whenever it senses a break in or intrusion inside the particular restricted area where it has been installed for the intended security monitoring. Introduction The cell phone call alert security system circuit which needs to be installed incorporates […]
Mobile Phone Controlled Robot Car Using DTMF Module
In this project we are going to control a manual robot through our cellphone using DTMF module and Arduino. By: Ankit Negi, Kanishk Godiyal and Navneet Singh sajwan INTRODUCTION In this project two cell phones, one for calling and one for receiving the call are used. The phone receiving the call is connected to the robot […]