In this post, I will show how to construct a over discharge protection circuit for 12v battery using Arduino which can protect 12V SLA battery against over discharge, and also protect the connected load from over voltage in case of overcharged battery is connected. Understanding Battery Charge/Discharge Rates All the batteries have natural decline, […]
Battery
Battery Full Charge Indicator Circuit using Two Transistors
This little circuit will alert the user regarding a battery reaching its full-charge level (over charge) while it’s being charged, by illuminating an LED. The circuit uses just a couple of transistors as the main active components. Main Feature The main feature of this design is not only its mini design but also its supply […]
Op Amp Battery Charger Circuits with Auto Cut Off
In this post I have explained a two op amp IC 741 and LM358 based auto cut off battery charger circuits which are not only accurate with its features but also allows a hassle free and quick setting up of its high/low cut-off threshold limits. High current batteries can e also charged using these circuits. […]
Make this 18V Cordless Drill Battery Charger Circuit
In this post I have explained how to build and use a 18V battery charger circuit for a cordless drill machine. The idea was requested by Mr. Chibuzo. Technical Specifications The Design Whether it’s a lead acid battery, a Ni-Cd or a Li-ion, this multipurpose battery charger shown below can be applied for any of […]
Generator/UPS/Battery Relay Changeover Circuit
In this article I have explained a generator/UPS/Battery relay changeover circuit for implementing a customized optimization for a generator, UPS, battery power network, in order to enhance the operational efficiency of the system. The idea was requested by Mr. Sidingilizwe. Circuit Objectives and Requirements First of all thank you for adding me to your circles. […]
Battery Bank Charger Circuit
The post narrates an automatic Battery Bank charger circuit with an automatic over charge cut-off feature for operating with an electric car. The idea was requested by Mr. George. Circuit Objectives and Requirements I’m George From Australia trying to convert small car into an electric car. The attached PDF show the configuration of lithium battery […]