Today we are going to discuss a purely analog high voltage protection circuit which is specially designed for solar power systems working with PV voltages from around 90 volts up to 400 volts DC. The main purpose of this circuit is to disconnect the inverter whenever the solar panel voltage falls below a safe level, […]
Inverters
Types of Solar Panels, Solar Inverters Explained
In this article I have explained the main types of solar panels available in the market, and also discuss the different types solar inverters which are specifically compatible with these solar panels. Further in the article we will also discuss how the efficiency of a solar panel may be affected due to to bad weather, […]
Easy H-Bridge MOSFET Driver Module for Inverters and Motors
If you are wondering if there’s an easy way to implement an H-bridge driver circuit without using the complex bootstrapping stage, the following idea will precisely solve your query. In this article I have explained how to build an universal full-bridge or H-bridge MOSFET driver circuit, using P-channel and N-channel MOSFETs, which can be used […]
Using MOSFET Body Diodes to Charge Battery in Inverters
In this post I have explained how the internal body diodes of MOSFETs could be exploited for enabling the charging of battery through the same transformer which is being used as the inverter transformer. In this article we will investigate a full bridge inverter concept and learn how the in-built diodes of its 4 MOSFETs […]
No Load Detector and Cut-off Circuit for Inverters
In this post I have explained a relay cut-off circuit which may be included in inverters to ensures that under a no load at the output the condition is quickly detected and the supply cut off, preventing the inverter from operating unnecessarily. The idea was requested by Mr. Rajath. Technical Specifications I need to adopt […]
Low Battery and Overload Protection Circuit for Inverters
A very simple low battery cut-off and overload protection circuit has been explained here. The figure shows a very simple circuit set up which performs the function of an overload sensor and also as an under voltage detector. In both the cases the circuit trips the relay for protecting the output under the above conditions. […]