The following article discusses a simple automatic micro UPS circuit which can be used with modems for acquiring uninterrupted power from a DC source, and battery during mains power failures. The circuit also incorporates an automatic over charge cut off, and a low battery indication feature. The circuit was requested by Mr. Kapil Goel. Technical […]
Automatic
2 Easy Automatic Inverter/Mains AC Changeover Circuits
I have been put forth with this question many times in this blog, how do we add a changeover selector switch for automatically toggling of an inverter when AC mains is present and vice versa. And also the system must enable automatic switching of the battery charger such that when AC mains is present the […]
2 Automatic Heatsink Temperature Controller Circuit
In this post we study about a automatic fan speed regulator circuit for controlling the temperature of a heatsink and from preventing the temperature to reach dangerous levels. This approach is to ensure safeguarding of the connected devices wit the heatsink. Written by: Preeti Das With the help of this circuit the speed of a […]
Automatic Inverter Output Voltage Correction Circuit
The common problem with many low cost inverters is their incapability of adjusting the output voltage with respect to the load conditions. With such inverters the output voltage tends to increase with lower loads and falls with increasing loads. The circuit ideas explained here can be added to any ordinary inverter for compensating and regulating […]
Ultrasonic Smart Automatic ON/OFF Switch Circuit
In this article we are going to build a smart automatic ON/OFF switch using Arduino, which can turn on or off gadgets automatically by sensing the presence of human nearby through the concept of ultrasonic. We are going to use ultrasonic module and Arduino to sense the presence of human which activates the gadgets such […]
Automatic Food Warmer Lamp for Hotels
In this post I have explained a simple food warmer lamp timer circuit for restaurants and hotels which can be used for automatically switching OFF the lamps after a predetermined time whenever the food under the lamps are idle or in the absence of an interaction under the lamps, thus saving precious electricity. The idea […]