• Skip to main content
  • Skip to primary sidebar

Homemade Circuit Projects

Need circuit help? Post them in the comments! I've answered over 50,000!

Blog | Categories | About | Hire Me | Contact | Calculators-online
You are here: Home / Battery Charger Circuits / Charging a Cellphone battery with a Laptop Battery

Charging a Cellphone battery with a Laptop Battery

Last Updated on May 17, 2026 by Swagatam 5 Comments

The post presents a simple circuit that may be used for charging a cellphone battery with a laptop battery. The idea was requested by Mr. Gyashuddin.

Table of Contents
  • Recharging Cellphone Battery with Laptop Battery
  • Solving the Circuit Idea
    • Circuit Diagram
      • LED Function

Recharging Cellphone Battery with Laptop Battery

hello sir my self md gyashuddin I want to know that it is passible to built a circuit which can ,recharge my cell phone battery from full charged my laptop battery.

If yes can you help me for this. I have : a laptop battery 10.8 V -- 48Wh(approx. 4444.4 mAh) and a mobile battery 3.7V -- 1450mAh In other word i want a adapter that recharge my cell battery from dc source ie my laptop battery my english is not good sir In simple word can i use my laptop battery as power backup for 3.7V cell phone battery Thanking you

Solving the Circuit Idea

Hello Mohammad, yes it's possible, just build a LM317 voltage regulator circuit, adjust its pot for getting 4.2V at the output, ........that's all...now you can connect the 10V to the input of the circuit and the 3.7V cell across the output of the circuit for fast charging it.

The detailed circuit regarding charging a cellphone battery with a laptop battery can be studied below:

Circuit Diagram

The value of R2 could be calculated either through this calculator software or using the following formula:

VO = VREF (1 + R2 / R1) + (IADJ × R2)

where VREF = 1.25

The IADJ  could be eliminated since it's too small to be considered in most cases.

LED Function

The shown LED will shut of when the 3.7V cell is almost fully charged.

Caution: Switch off the power to the 3.7V cell as soon as the red LED begins shutting off, in order to prevent the cell from over charging and damage.

For ensuring better safety you may want to set the output voltage to 3.9V, although this could mean the cell getting charged only upto 80% and not upto the optimal point.

For implementing an automatic cut-off you can try this automatic battery charger circuit concept

You'll also like:

  • lowbatteryindicatorcircuit 2Low Battery Indicator Circuit Using Two Transistors Only
  • car battery indicator circuit3 LED Battery Level Indicator Circuit
  • betavolt batteryUse this Battery for 50 Years without Charging
  • Parallel Battery Charger Circuits Explained

Filed Under: Battery Charger Circuits Tagged With: Battery, Cellphone, Charging, Laptop

About Swagatam

I am an electronics engineer and doing practical hands-on work from more than 15 years now. Building real circuits, testing them and also making PCB layouts by myself. I really love doing all these things like inventing something new, designing electronics and also helping other people like hobby guys who want to make their own cool circuits at home.

And that is the main reason why I started this website homemade-circuits.com, to share different types of circuit ideas..

If you are having any kind of doubt or question related to circuits then just write down your question in the comment box below, I am like always checking, so I guarantee I will reply you for sure!



Previous Post: « Remote Controlled Night Lamp Circuit
Next Post: Solar Cellphone Charger Circuit »

Reader Interactions

Questions & Answers

Total Posts: 5
Newest Oldest
ABBA
November 30, 2017 • 9 years ago #56262

can 5v input be used for the regulator so that 1.25Vref and output be 4.85V.`thanks in advance

Reply
SwagatamAdmin
November 30, 2017 • 9 years ago #56267

The input has to be at least 6 to 7V, 5V might not work correctly.

Reply
Oyekunle Quadry (Gentlesoul)
January 31, 2016 • 10 years ago #38240

can it be use to charge mobile phone directly sir?

Reply
SwagatamAdmin
February 1, 2016 • 10 years ago #38250

yes it can be used….you can also employ the following deign for an auto cut off

https://www.homemade-circuits.com/2012/02/how-to-build-automatic-6-volt-12-volt.html

Reply
Oyekunle Quadry (Gentlesoul)
January 31, 2016 • 10 years ago #38239

great one

Reply

Need Help? Please Leave a Comment! We value your input—Kindly keep it relevant to the above topic! Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar



My Youtube Channel

Circuit Simulator

circuit simulator image



Subscribe to get New Circuits in your Email



Categories

  • Arduino Projects (95)
  • Audio and Amplifier Projects (134)
  • Automation Projects (18)
  • Automobile Electronics (103)
  • Battery Charger Circuits (88)
  • Datasheets and Components (109)
  • Electronics Theory (149)
  • Energy from Magnets and Earth (40)
  • Games and Sports Projects (11)
  • Grid and 3-Phase (20)
  • Health related Projects (27)
  • Home Electrical Circuits (13)
  • Indicator Circuits (16)
  • Inverter Circuits (100)
  • Lamps and Lights (162)
  • Meters and Testers (72)
  • Mini Projects (28)
  • Motor Controller (68)
  • Oscillator Circuits (28)
  • Pets and Pests (15)
  • Power Supply Circuits (91)
  • Remote Control Circuits (50)
  • Security and Alarm (65)
  • Sensors and Detectors (107)
  • SMPS and Converters (45)
  • Solar Controller Circuits (61)
  • Temperature Controllers (43)
  • Timer and Delay Relay (50)
  • Voltage Control and Protection (44)
  • Water Controller (37)
  • Wireless Circuits (31)



Other Links

  • Privacy Policy
  • Cookie Policy
  • Disclaimer
  • Copyright
  • Videos
  • Sitemap

People also Search

555 Circuits | 741 Circuits | LM324 Circuits | LM338 Circuits | 4017 Circuits | Ultrasonic Projects | SMPS Projects | Christmas Projects | MOSFETs | Radio Circuits | Laser Circuits | PIR Projects |



Recent Comments

  • Swagatam on Pure Sine Wave Inverter Circuit Using IC 4047
  • Johan on Pure Sine Wave Inverter Circuit Using IC 4047
  • Swagatam on DPDT Relay Working, Pinouts, Testing Explained
  • Swagatam on How to Modify SMPS for Adjustable Current and Voltage Output
  • Swagatam on Pure Sine Wave Inverter Circuit Using IC 4047

Social Profiles

  • Twitter
  • YouTube
  • Instagram
  • Pinterest
  • My Facebook-Page
  • Stack Exchange
  • Linkedin

© 2026 · Swagatam Innovations