In this post I have explained 3 simple sound activated relay switch circuits which can used as a module for any system that might be assigned to trigger by detecting some kind of sound pressure level. Or simply applications such as a voice activated alarm security circuit. 1) Circuit Objective Utilizing this basic sound activated […]
Activated
Laser Activated GSM Call Alert Security Circuit
In this post I have explained a simple laser GSM call alert security circuit which immediately calls the master as soon as an intruder is detected through a laser beam interruption. The idea was requested by Mr. Roldan. Circuit Objectives and Requirements I am not an electronic engineer, but I can manage to troubleshoot minor […]
Flashlight Activated Burglar Alarm Circuit
This flashlight triggered burglar alarm circuit will instantly switch ON an alarm as soon as it detects light from the burglar’s torch or flashlight. Burglars and thieves normally set out to steal or rob during nights, when it is completely dark, and depend on a flashlight to investigate the area. Our circuit is setup and […]
Laser Beam Light Activated Remote Control Circuit
The following post illustrates a simple light toggled/operated remote control circuit, which can be activated by an ordinary flashlight or more effectively through a laser beam unit (key chain type). The circuit idea may be understood with the below mentioned points: How the Circuit Functions Transistor T3 along with the associated parts and the LDR […]
Whistle Activated Switch Circuit
In this post I have explained how to build a simple whistle sound operated relay circuit, which can be used for switching ON/OFF a 220 V load through whistle sounds. You can consider this circuit to be a whistle operated remote control circuit which will operate a connected load remotely through the sound of whistling. […]
Sound Activated Remote Control Circuit
This sound activated remote control circuit can be used to operate any electrical load ON/OFF, through a double sound command. Thus, the circuit ensures that the load cannot be operated through any random single sound triggers, which makes the circuit very fool proof. Our device will require two shifted sound commands. However, the second sound […]