The proposed sinewave inverter UPS circuit is built using PIC16F72 microcontroller, some passive electronic components and associated power devices. Data provided by: Mr. hisham bahaa-aldeen Main Features: The main technical features of the discussed PIC16F72 sinewave inverter may be evaluated from the following data: Power output (625/800va) fully customization and can be upgraded to other […]
UPS
How to Make an ATX UPS Circuit with Charger
In this post I have explained a simple ATX UPS circuit with an automatic charger for enabling an automatic changeover from mains to battery power during mains failures and for ensuring an uninterruptible operation of the ATX load. Technical Specifications I´m interested in your site and there are a lot good ideas. But for my […]
How to Build a 220V DC Inverter UPS Circuit
In this post I have explained a simple 220 V to 220V DC online UPS inverter circuit. The idea was requested by Mr. Taiye. Technical Specifications I intend to build a 1000 watt UPS with a different concept (inverter with high voltage input dc). I will use a battery bank of 18 to 20 sealed […]
How to Convert an Inverter to an UPS
An inverter is an equipment which will convert a battery voltage or any DC (normally a high current) into a higher mains equivalent voltage (120V, or 220V), however unlike an UPS inverters may lack one feature, that is these may not be able to switch from mains battery charging mode to inverter mode and vice […]
Automatic Micro UPS Circuit
The following article discusses a simple automatic micro UPS circuit which can be used with modems for acquiring uninterrupted power from a DC source, and battery during mains power failures. The circuit also incorporates an automatic over charge cut off, and a low battery indication feature. The circuit was requested by Mr. Kapil Goel. Technical […]
3 Simple DC UPS Circuits for Modem/Router
In the following article I have explained 3 useful DC to DC uninterruptible power supply circuits or DC UPS circuits for low DC to DC uninterruptible power applications The first idea below presents a DC UPS circuit can be used for providing back up power to modems or routers during mains failures, so that the broadband/WiFi […]





