In this article I have explained a simple circuit for enabling the turn signal lamp of any car to carry out a two-way function of DRL lights as well as well the stipulated turn lights. The idea was requested by Mr. Artem. Technical Specifications Thank you for your fanaticism with electronics, this is really noticeable […]
Turn
3-Pin Solid-State Car Turn Indicator Flasher Circuit – Transistorized
Although, most of the car electronics have evolved into solid-sate versions, a turn indicator flasher unit is one device which still depend on a relay based design in many of the modern cars. Disadvantages of Relay Based Flasher There are a couple major disadvantages of a relay based electromechanical flasher unit: 1) First, these being […]
Lamp Outage Detector Circuit for Car Turn Signal
The O.E.M. turn signal flashing units installed in automobiles have two basic functions i.e. Flasher and Lamp outage detection. These flashers are usually built with an 8-pin IC like U2044B, U6432B etc. which are specifically made for automotive flashers. Designed and Written By Abu-Hafss Circuit Operation NORMAL OPERATION: -input = Square wave between 11.89V – […]
Car Warning Tone Generator for Ignition, Headlight, Turn Lights
The circuit explained here is basically a warning signal generator designed largely for automobile application. It triggers a warning signal in a situation when the turn indicator switch is not restored back to its neutral status. The circuit is especially useful for all those cars where the turn indicator system is not supported with an […]