In this post I have explained the construction of a homemade 10 watt LED lamp using ready made 12 V SMPS adapter. The project was successfully built by Mr. Debabrata Mandal. In many of previous posts I have discussed the use of 1 watt white LEDs for making high efficiency LED lamps for implementing in […]
Adapter
Introduction to I2C LCD Adapter Module
In this post we are going take a look at “I2C” or “IIC” or “I square C” based LCD adapter module, which will reduce wire connections between Arduino and LCD display to just 2 wires, also saving tons of GPIO pins for other sensors / drives etc. Before I have explained about I2C LCD adapter […]