This power supply functions with a broad input voltage range from 90 to 265 V AC and produces a dual output in the form of 5 V / 2.5 A, and 14.5 V / 1 A. The Circuit Layout The great aspect of this source is its minimal power consumption, optimized power consumption in idle […]
Search Results for: smps
32V, 3 Amp LED Driver SMPS Circuit
In this article I have explained a 32V, 3 amp SMPS circuit which may be specifically used as an SMPS 100 watt LED driver, rated with the same specs. The circuit of the proposed 32 V, 3 amp smps led driver may be understood with the the help of the following points: Circuit Operation The […]
Adjustable 0-100V 50 Amp SMPS Circuit
The high power adjustable switching power supply is perfect for the purpose of laboratory work. The topology used to design the system is switching topology – half controlled bridge. Written and Submitted by: Dhrubajyoti Biswas Warning: The following circuit design works with a direct 220 V Mains AC without any isolation at the input side, […]
SMPS Halogen Lamp Transformer Circuit
One of the best substitutes for traditional light transformer for halogen bulbs is the electronic halogen transformer. It can also be used with non-halogen bulbs and any other form of resistive loads that does not run on RF current. Written and Submitted By: Dhrubajyoti Biswas Halogen Lamp Working Principle The electronic halogen lamp transformer works […]
SMPS Welding Inverter Circuit
If you are looking for an option to replace conventional welding transformer, the welding inverter is the best choice. Welding inverter is handy and runs on DC current. The current control is maintained through potentiometer. By: Dhrubajyoti Biswas Using Two Switch Topology When developing a welding inverter, I applied forward inverter with two switches topology. […]
SMPS 2 x 50V 350W Circuit for Audio Power Amplifiers
This article will illustrate a simple procedure to devise an unregulated 50V switching SMPS symmetric power supply of 350W. This unit can be substituted with the standard audio amplifier power supply to reduce expense and also the weight. The proposed power supply works as a half-bridge with no regulation. Written and Submitted by: Dhrubajyoti Biswas […]