• Skip to main content
  • Skip to primary sidebar

Homemade Circuit Projects

Need circuit help? Post them in the comments! I've answered over 50,000!

Blog | Categories | About | Contact | Calculators-online
You are here: Home / Meters and Testers / Testing Alternator Current using Dummy Load

Circuit Simulator: Assemble and Simulate

Testing Alternator Current using Dummy Load

Last Updated on December 28, 2019 by Swagatam 1 Comment

In this post I have explained a method of checking or verifying alternator maximum current delivering capacity using a shunt regulator as the dummy load and an ammeter. The idea was inquired by Mr. Joe.

Table of Contents
  • Circuit Question
  • Assessing the The Design
  • The Design
  • Circuit Diagram

Circuit Question

I need help designing an electronic dummy load that can handle high enough power from motorcycle alternator.

I need to know how much power is available from the alternator because when I first time finished rewound the alternator, it shows me 7A of power from two winding set (my alternator is modified by adding another winding on outer layer of existing winding).

But now it only shows about 4A of power from the two winding set. Is it best to use electronic dummy load or just simple resistive load as resistive load is only work in certain voltage range (that's what I know) to test the alternator.

Kindly need your help for the circuit design.

Thanks and regards,

Joe

Assessing the The Design

Hi Joe,

did you try using your digital mulltimeter with a shunt regulator.

You can set the meter to the maximum current range, normally this could be at 20Amp AC range and check the results by connecting its prods at the output of the shunt regulator and input of the shunt with the alternator winding output. This should provide you with the necessary information??

The Design

I have already discussed a simple shunt regulator circuit in one of my earlier posts, we can implement the same shunt regulator circuit as a dummy load for the proposed testing of alternator current, through an ammeter in series with the shunt device.

Although an ammeter can be directly connected with the alternator output for measuring its current capacity, a shunt regulator ensures a controlled measurement of the measurement over a specified voltage limit.

Meaning if the alternator is rated to generate a fluctuating voltage say from12V to 24v, the shunt regulator could be set to dump the excess voltage above 12V and control the alternator voltage at this level.

However for the meter this might have no notable effect except a little stress-free working due to the controlled voltage level.

The following circuit shows how to use a shunt regulator as a dummy load with a ammeter for testing alternator current safely and accurately.

Circuit Diagram

warning message: electricity is dangerous, proceed with caution
Circuit for Testing Alternator Current using Dummy Load

You'll also like:

  • 1.  Alcohol Detector Meter Circuit using MQ-3 Sensor Module
  • 2.  Satellite Signal Strength Meter Circuit
  • 3.  AC Millivolts Meter Circuit Using IC 741
  • 4.  Arduino Tachometer Circuit for Precise Readings
  • 5.  Make this Amplifier Power Meter Circuit
  • 6.  3-Digit LED Capacitance Meter Circuit

Filed Under: Meters and Testers Tagged With: Alternator, Current, Dummy, Load, Testing

About Swagatam

I am an electronics engineer and doing practical hands-on work from more than 15 years now. Building real circuits, testing them and also making PCB layouts by myself. I really love doing all these things like inventing something new, designing electronics and also helping other people like hobby guys who want to make their own cool circuits at home.

And that is the main reason why I started this website homemade-circuits.com, to share different types of circuit ideas..

If you are having any kind of doubt or question related to circuits then just write down your question in the comment box below, I am like always checking, so I guarantee I will reply you for sure!

Previous Post: « Autoclave Heater Controller Circuit
Next Post: Force Sensing Resistor Circuit Explained »

Reader Interactions

Comments

  1. Mark says

    November 24, 2020 at 7:52 am

    thanks Swagatam understaning much more about avr just cycling around to understant avrs better …no need to reply answer some ones question THANKS

    Reply

Need Help? Please Leave a Comment! We value your input—Kindly keep it relevant to the above topic! Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar




Subscribe to New Posts

Categories

  • Arduino Projects (89)
  • Audio and Amplifier Projects (132)
  • Automation Projects (17)
  • Automobile Electronics (101)
  • Battery Charger Circuits (83)
  • Datasheets and Components (104)
  • Electronics Theory (143)
  • Free Energy (37)
  • Games and Sports Projects (11)
  • Grid and 3-Phase (19)
  • Health related Projects (25)
  • Home Electrical Circuits (12)
  • Indicator Circuits (14)
  • Inverter Circuits (88)
  • Lamps and Lights (142)
  • Meters and Testers (69)
  • Mini Projects (46)
  • Motor Controller (64)
  • Oscillator Circuits (27)
  • Pets and Pests (15)
  • Power Supply Circuits (108)
  • Remote Control Circuits (50)
  • Security and Alarm (64)
  • Sensors and Detectors (101)
  • Solar Controller Circuits (59)
  • Temperature Controllers (42)
  • Timer and Delay Relay (49)
  • Transmitter Circuits (29)
  • Voltage Control and Protection (39)
  • Water Controller (36)




Other Links

  • Privacy Policy
  • Cookie Policy
  • Disclaimer
  • Copyright
  • Videos
  • Sitemap




People also Search

555 Circuits | 741 Circuits | LM324 Circuits | LM338 Circuits | 4017 Circuits | Ultrasonic Projects | SMPS Projects | Christmas Projects | MOSFETs | Radio Circuits | Laser Circuits | PIR Projects |

Social Profiles

  • Twitter
  • YouTube
  • Instagram
  • Pinterest
  • My Facebook-Page
  • Quora
  • Stack Exchange
  • Linkedin



  • Recent Comments

    • Swagatam on How to Make HHO Fuel Cell Circuit in Automobiles for better Fuel Efficiency
    • Swagatam on How to Repair Mosquito Swatter Bats
    • Pradosh on How to Repair Mosquito Swatter Bats
    • eq on How to Make HHO Fuel Cell Circuit in Automobiles for better Fuel Efficiency
    • Swagatam on 100A AC Load Monitoring Circuit using Arduino, Watt Limit, LCD, Alarm, Auto Shutdown

    © 2025 · Swagatam Innovations