• Skip to main content
  • Skip to primary sidebar

Homemade Circuit Projects

Need circuit help? Post them in the comments! I've answered over 50,000!

Blog | Categories | About | Contact | Calculators-online
You are here: Home / Health related Projects / Using UV-C Light Chambers for Disinfecting Humans from Coronavirus

Using UV-C Light Chambers for Disinfecting Humans from Coronavirus

Last Updated on June 28, 2021 by Swagatam 24 Comments

A rather easy way of disinfecting humans and objects on a large scale and in public places could be by irradiating them with ultraviolet rays (UV-C), in special UV-C illuminated chambers or passages.

Table of Contents
  • Why Sun Rays are Harmful to Skin but not to Coronavirus
  • What is Far-UVC and Why it is a Safe UV Germicidal
  • Controlling Pandemics like Coronavirus with far-UVC rays
  • Which Type of Lamp will Produce far-UVC Light?
  • How to Make UV Lamp Human Disinfection Chamber
  • Building Procedure

This includes the pandemic COVID-19, which can be suppressed by installing and implementing these specially created UV-C germicidal lamps.

The following article provides a detailed overview regarding how the concept can be used for making ultraviolet light chambers and disinfecting humans safely from cornavirus.

Warning: The information presented in the following article were referred from various external sources, and the author takes no responsibility for the consequences resulting from the experiments specified in the below article.

Why Sun Rays are Harmful to Skin but not to Coronavirus

Sun rays that reach us mostly consist of UV-A and UV-B type of ultraviolet rays, (UV-C being blocked by the earth's ozone layer).

UV-A and UV-B due to their longer wavelength than UV-C are able to penetrate human skin, and trigger development of cancerous cells and sun burns, but are quite ineffective in breaking the RNA of a virus cell. Hence, prolonged exposure to sun rays can be harmful to human skin, but may have no effect on some special viruses like coronavirus.

Unlike UVA and UVB, UV-C can be fatal for viruses as well for human skin, but since these are naturally blocked by the earth's ozone layer are never a matter of concern.

On the other hand since UV-C can be generated through artificial germicidal lamps, they work very well in eliminating viruses like coronavirus.

However, since UVC is equally dangerous to human skin, it is strictly advised by WHO not to try UVC lamps for disinfecting hands or body sections.

There's another range of ultraviolet light called the far-UVC, which has been tested with extremely promising results. Far-UVC has the capability of selectively eliminating pathogens like coronavirus, without causing any harm to human cells.

What is Far-UVC and Why it is a Safe UV Germicidal

Although it is a proven fact that normal ultraviolet light (UV-C) is highly effective in killing bacteria and inactivating all types of viruses, humans are advised to avoid UV lights emitted by typical germicidal lamps due to the risks of developing skin cancer.

However, extensive research in this field have proved that UV-C light in the range of 200 nm and 222 nm wavelength (also called far-UVC) are capable of traversing virus and microbial cells, but not human cells. This is simply because virus and microbial cells are much smaller than human or mammalian cells and unable to resist the far-UVC wavelength penetration.

If we take the example of coronavirus cell diameter, it is around 0.06 μm and 0.14 μm (1 μm = 1 micron), which is significantly smaller than a human cell (between 10 to 25 μm).

Due to their tiny cell size far-UVC rays are able to overwhelm and disrupt virus cells easily, but are absorbed by human cells preventing the rays from reaching the nucleus of the cell.

When far-UVC light having wavelength of 222 nm hits a human cell, it is vigorously absorbed by the cytoplasm protein of human cell, causing the rays to get severely attenuated, and harmless.

This implies that far-UVC emission is ineffective in penetrating the stratum corneum of our skin, and thus cannot reach underlying melanocytes which form the critical basal cells of the skin.

Even human eyes can remain unaffected due to the many protective outer layers which can easily absorb and far-UVC rays rendering them harmless.

Controlling Pandemics like Coronavirus with far-UVC rays

Based on a research at the Center for Radiological Research at Columbia University Irving Medical Center (New York, NY), installing overhead far-UVC lights in susceptible areas like hospitals, doctors’ offices, schools, airports, airplanes, etc may be an ideal and safe way to get rid of seasonal flu epidemics from viruses.

This likewise means, far-UVC lights can be effectively used for inactivating and eliminating the novel coronavirus from different surfaces, objects and human body externally.

Which Type of Lamp will Produce far-UVC Light?

As per the sources, researches have shown that filtered krypton-bromine (Kr-Br) excilamp can be used for emitting the required far-UVC at 207 nm wavelength. The light from this lamp has high antiviral and antimicrobial efficacy, yet is negligibly cytotoxic to human cells.

Further research have also shown that filtered krypton-chlorine (Kr-Cl) excimer lamp which are specified to generate 222 nm monoenergetic UV rays can be effective in inactivating viruses but may not be cytotoxic or mutagenic to mammalian cells.

Remember, cheap germicidal lamps sold at online stores like amazon and eBay will never produce far-UVC and therefore must never be tried for the specified disinfection purpose.

The units which are specifically designed to produce 222 nm wavelength UV rays are suitable for killing coronavirus, an example lamp can be visualized in the following image:

warning message: electricity is dangerous, proceed with caution
eximer lamps

How to Make UV Lamp Human Disinfection Chamber

Portable chambers and corridors with far-UVC lamps could be manufactured and installed in places like markets, shopping malls.

Authorities may perhaps then guide the people to walk through the UV lit chambers so that externally their bodies are completely eradicated from all forms viruses. This could be perhaps effective for suppressing severe pandemic like COVID-19.

An example set up of the human disinfection chamber can be seen in the following image:

far UVC sanitizer

Building Procedure

Possibly, to build such disinfection chambers on large scales, the construction has to be straightforward and cheap. The easiest way is to assemble sheets of good quality plywood to make narrow channels with dimensions of 7 by 5 feet, and 20 feet long.

The inner wall of the chamber could be painted with shiny metallic texture, so that the UVC light is reflected from all angles for generating maximum antiviral efficacy over the target.

The example image above shows only 4 lamps on either walls, which could be increased to higher numbers for enabling faster elimination of pathogens like coronavirus.

Similarly, garages could be also installed with UV bulbs for disinfecting buses, automotive bodies, and even food crates in massive scales.

However, for sterilizing non-living things, and objects, costly far-UVC may not be required, instead the conventional UVC bulbs could be used for the purpose.

In China UVC is already being implemented extensively for disinfecting pubic transport systems, as shown in the following image:

UVC bus disinfecting

Reference: Using far-UVC on mammalian skin

You'll also like:

  • 1.  Transcranial Random Noise Stimulation (tRNS) Circuit
  • 2.  Heart Rate Monitor Circuit
  • 3.  Patient Drip Empty Warning Indicator Circuit
  • 4.  How to Generate Pure Oxygen and Hydrogen at Home
  • 5.  Room Air Ionizer Circuit – For Pollution Free Living
  • 6.  Audible Meditation Timer Circuit

About Swagatam

I am an electronics engineer with over 15 years of hands-on experience. I am passionate about inventing, designing electronic circuits and PCBs, and helping hobbyists bring their projects to life. That is why I founded homemade-circuits.com, a website where I share innovative circuit ideas and tutorials. Have a circuit related question? Leave a comment.... I guarantee a reply!

Previous Post: « 10 Useful Function Generator Circuit Diagrams Explained
Next Post: 5 V to 10 V Converter for TTL Circuits »

Reader Interactions

Comments

  1. sam says

    February 11, 2022 at 1:28 pm

    Hi Swagatam,
    i have project for sanitizing air and surface and it already finish, need some advise for on/off device when people close to source from 1.5m. can i have your email

    Reply
    • Swagatam says

      February 11, 2022 at 1:39 pm

      Hi Sam, you can refer to the following post for more info:

      https://www.homemade-circuits.com/automatic-hand-sanitizer-circuit/

      Reply
  2. EE in MN says

    February 16, 2021 at 11:27 pm

    Doesn’t automotive glass have a UV blocking coating? The little stamp in the corner of my car window says it does, and it makes perfect sense that it would. If so, what’s the benefit of treating the outside of a bus, besides another taxpayer-funded debacle, and a highly emotional media opportunity?

    Reply
    • Swagatam says

      February 17, 2021 at 9:22 am

      The vehicle inside is sanitized by spraying disinfecting liquids…

      Reply
  3. Noah Marshall says

    January 8, 2021 at 4:30 pm

    Hi Swagatam,
    Currently going a 2nd year university project involving the use of a UV disinfectant device. I have a planned operational flow diagram i could send to you if you think you could help and i also having drawings of our intended design. The plan is to create a bus handle which will be cleaned in between users thus needing a motor and motion sensor to move the handle through an isolated UV chamber. I have limited knowledge on circuits and have been looking at hairdryers as a comparison but any help on the subject would be great. I can send you the drawings and operation diagram if you think you can help.
    Love this site by the way already been very helpful.
    Noah

    Reply
    • Swagatam says

      January 9, 2021 at 11:10 am

      Hi Noah, Thank you for liking this site…If you are looking for an UV lamp driver, then I think you can find plenty of these through many online sources, and also through Youtube videos. Alternatively you can buy one of these readymade from any online stores like amazon or eBay or aliexpress.

      Let me know if you have any specific questions.

      Reply
  4. R Simons says

    August 4, 2020 at 6:00 am

    Dear all,

    The story on ‘far UV-C’ is not quite so simple, and it is certainly not a technology for hobbyists. There is hugely promising research but more needs to be learnt before any roll-out such as this. If and when there is sufficient evidence for safe direct human exposure installations will require careful implementation by skilled professionals; high-energy radiation sources are not toys and should be treated with respect.

    Reply
    • Swagatam says

      August 4, 2020 at 6:49 am

      The far-UVC chamber concept explained above is not for prolonged exposures rather for a brief moment of exposure to deactivate the superficial pathogens. The chambers are intended for humans to pass through them and not stay inside them for too long.

      Reply
  5. Dennis Niemand says

    July 22, 2020 at 9:58 pm

    Good day.
    I am the CEO of a medical apparel factory in South Africa.

    Iwant to put up a uvc chamber to sterilize my hospital garments.
    What would you recommend for low cost lights or what will i ask for at the
    electronic shop?
    Will the led lights be effective. Or what will be the quickest?

    Where can i download building plans for the chamber?

    Kind regards.

    Reply
    • Swagatam says

      July 23, 2020 at 9:15 am

      Hi, you can apply the UVC bulbs specified in the above article. However, thse far UVC bulbs are not cheap, they are around $25 per piesce.

      There are no specific plans for building an UVC light chamber, higher number of bulbs will proportionately produce better and quicker results, and vice versa.

      Reply
  6. Alex says

    June 18, 2020 at 1:35 pm

    Hi Sir, Do you all have the formula to calculate the UV dosing? the area to disinfection, distance of the source and time related?
    how should I choose the required UV power for some enclose area with the best effectiveness?
    Thanks 🙂

    Reply
    • Swagatam says

      June 18, 2020 at 4:51 pm

      Hi Alex, sorry i do not have the formula at this moment with me. The easiest way to get highest effectiveness is to make sure the entire area turns deep purple or the color of the UV light in total darkness.

      Reply
  7. Mr Dhananjay Patil says

    May 5, 2020 at 4:23 pm

    Hi sir, pls send UVC lamp details..
    I am wating sir..

    Reply
    • Swagatam says

      May 5, 2020 at 5:38 pm

      Hi Dhananjay, the details are already given in the article, please see the info under “Which Type of Lamp will Produce far-UVC Light?”

      Reply
  8. Rajiv Kulkarni says

    May 5, 2020 at 3:49 am

    Exciting and useful information about far-UVC light. I always go through your articles and circuit ideas! Being an engineer, I also would like to share comments whenever applicable.

    Reply
    • Swagatam says

      May 5, 2020 at 9:35 am

      Glad you liked the information, please feel free to comment and share your feedback whenever you wish.

      Reply
  9. Eric maduku says

    May 3, 2020 at 1:43 pm

    Thanks for your good works. This the best way forward as many of such practices have been used to cure people.
    The world problem is the pharmaceutical companies doing everything possible to convince the world that drugs are the best so as to keep them in business. I have been planning of doing it after reading abot Nichols Tesla uv rays therapy. Thanks for the eye opener.

    Reply
    • Swagatam says

      May 4, 2020 at 10:26 am

      Thank you for your valuable feedback, appreciate it very much!

      Reply
  10. bapura kiran says

    April 19, 2020 at 10:36 am

    sir it ws a good article
    Problem is uv-c is harmfull for humans cancause restucturing of DNA leading to cancer or atleast irritation to skin
    thats why these chambers have not been produced

    Reply
    • Swagatam says

      April 19, 2020 at 12:55 pm

      Hi Kiran, please go through the complete article, you will realize that it is not UVC rather far-UVC which can be applied for the discussed purpose and is completely safe for humans.

      Reply
  11. CLAUDION MENDES PEREIRA says

    April 18, 2020 at 2:47 am

    “Using ultraviolet chambers to disinfect humans from coronavirus”
    THIS ARTICLE AND TIPS OF ULTRAVIOLET lamp PROJECTS ARE FREE, NO LICENSE REQUIRED? I thought it was very good.
    I VERY LIKED YOUR SITE. VERY DIDACTIC.

    Reply
    • Swagatam says

      April 18, 2020 at 11:06 am

      Thank you very much!

      Reply
      • Roxanne Harito says

        June 11, 2020 at 1:58 am

        how long would one have to be inside a chamber for it to be effective.

        Reply
        • Swagatam says

          June 11, 2020 at 12:39 pm

          30 seconds, if the lights sufficiently powerful

          Reply

Need Help? Please Leave a Comment! We value your input—Kindly keep it relevant to the above topic! Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Subscribe to New Circuit Ideas

Categories

  • Arduino Projects (87)
  • Audio and Amplifier Projects (132)
  • Automation Projects (17)
  • Automobile Electronics (101)
  • Battery Charger Circuits (83)
  • Datasheets and Components (104)
  • Electronics Theory (143)
  • Free Energy (37)
  • Games and Sports Projects (11)
  • Grid and 3-Phase (19)
  • Health related Projects (25)
  • Home Electrical Circuits (12)
  • Indicator Circuits (14)
  • Inverter Circuits (87)
  • Lamps and Lights (142)
  • Meters and Testers (69)
  • Mini Projects (46)
  • Motor Controller (64)
  • Oscillator Circuits (27)
  • Pets and Pests (15)
  • Power Supply Circuits (108)
  • Remote Control Circuits (50)
  • Security and Alarm (64)
  • Sensors and Detectors (101)
  • Solar Controller Circuits (59)
  • Temperature Controllers (42)
  • Timer and Delay Relay (49)
  • Transmitter Circuits (29)
  • Voltage Control and Protection (37)
  • Water Controller (36)

Calculators

  • Battery Back up Time Calculator
  • Capacitance Reactance Calculator
  • IC 555 Astable Calculator
  • IC 555 Monostable Calculator
  • Inductance Calculator
  • LC Resonance Calculator
  • LM317, LM338, LM396 Calculator
  • Ohm’s Law Calculator
  • Phase Angle Phase Shift Calculator
  • Power Factor (PF) Calculator
  • Reactance Calculator
  • Transistor Astable Calculator
  • Transistor base Resistor Calculator
  • Voltage Divider Calculator
  • Wire Current Calculator
  • Zener Diode Calculator
  • Filter Capacitor Calculator
  • Buck Converter Calculator
  • Boost Converter Calculator
  • Solar Panel, Inverter, Battery Calculator
  • Wire Current Calculator
  • SMPS Transformer Calculator
  • IC SG3525, SG3524 Calculator
  • Inverter LC Filter Calculator

People Also Search

555 Circuits | 741 Circuits | LM324 Circuits | LM338 Circuits | 4017 Circuits | Ultrasonic Projects | SMPS Projects | Christmas Projects | MOSFETs | Radio Circuits | Laser Circuits | PIR Projects |

Recent Comments

  • Swagatam on How Shunt Regulator TL431 Works, Datasheet, Application
  • SA on How Shunt Regulator TL431 Works, Datasheet, Application
  • Swagatam on Timer Based Cell Phone Charger Circuit
  • Nitesh Agrawal on Timer Based Cell Phone Charger Circuit
  • Swagatam on Timer Based Cell Phone Charger Circuit

Company

  • Privacy Policy
  • Cookie Policy
  • About Me
  • Contact
  • Disclaimer
  • Copyright
  • Videos
  • Sitemap

Social Profiles

  • Twitter
  • YouTube
  • Instagram
  • Pinterest
  • My Facebook-Page
  • Quora
  • Stack Exchange
  • Linkedin
  • © 2025 · Swagatam Innovations