In this post I have explained the construction of a 200 to 600 LED circuit project, using series parallel LEDs for creating an alphabetical display sign board. The idea was requested by Mr. Mubarak Idris. Circuit Objectives and Requirements I need a blinking LED light that show”WELCOME TO” blink and then “COLLEGE OF ENGINEERING” base […]
Newly Updated Circuit Projects:
2.4 GHz 10 Channel Remote Control Switch Circuit
In this post I will show how to construct a 10 channel remote control switch circuit based on ISM (industrial, Scientific and Medical) band. Introduction The ISM band is operated at 2.4 GHz, which can be used without licensing with reasonable power output. The proposed project is general purpose ON/OFF wireless switch, which can be […]
2-Pin Motorcycle Turn Signal Flasher Indicator Circuit with Buzzer
A simple construction procedure of a motorcycle electronic 2 pin turn signal indicator with beeper circuit has been thoroughly I have explained in this article. Normally, the electro-mechanical types of turn signal indicators are not reliable due to low consistency and vulnerability to changing weather conditions. The present design easily withstands the above parameters and […]
2 watt Amplifier Circuit
A very simple 2 watt audio amplifier circuit has been presented here which can be constructed by all new electronic hobbyists for amplifying small signal frequencies and for other similar experiments. Circuit Operation
2 Useful Energy Saver Solder Iron Station Circuits
In this post I have explained how to build a energy efficient soldering iron station circuit for achieving maximum power saving from the unit, by ensuring that it is automatically switched OFF when not being used for sometime. Written and Submitted By: Abu-Hafss DESIGN#1: OBJECTIVE To design a circuit for solder iron which would not […]
2 Tone Ringtone Generator Circuit
The IC LS1240A from SGS Thompson is specifically designed for generating a 2 tone ringtone generator circuit. Thus the IC specifically becomes suitable for landline telephones for producing the ringtones when a call is received. However with little modifications the IC can be easily utilized for normal applications, in circuits where a double tone alarm […]