The proposed circuit will allow you to remotely control a mains AC operated appliance across rooms of your home through mains power line communication or PLC concept. In PLC technology, an electronic circuit which works as a transmitter is plugged-in to the mains wiring (220 V or 120 V) injects a modulating high frequency data […]
Remote Control Circuits
Make this IR Remote Control Range Extender Circuit
In this post I have explained how to increase or extend the range of an ordinary infra red or IR remote control through a 433MHz RF remote control system. IR Range Extender Concept The idea of this circuit is to feed the IR data from an IR transmitter into the transmitter input of an RF […]
2.4 GHz 10 Channel Remote Control Switch Circuit
In this post I will show how to construct a 10 channel remote control switch circuit based on ISM (industrial, Scientific and Medical) band. Introduction The ISM band is operated at 2.4 GHz, which can be used without licensing with reasonable power output. The proposed project is general purpose ON/OFF wireless switch, which can be […]
Controlling LED Strip Light ON/OFF and Brightness with any Remote Control
In this post I will show how to construct LED strip controller circuit using Arduino, which can turn ON/OFF and decrease/increase brightness of LEDs using ordinary IR (Infrared) remote. What is LED Strip Light? (For noobs) If you are not familiar with LED strip lights, let’s understand what it is. LED strips (sometimes called as […]
Remote Controlled Solar Lamp Intensity Controller Circuit
In this post I have explained a simple remote controlled solar lamp intensity controller circuit which can be used for controlling the street lamp LED intensity without practically reaching for the LED box. The idea was requested by one of the dedicated members of this website Circuit Objectives and Requirements I have successful build this […]
How to make a Remote Controlled Game Scoreboard Circuit
In this post I have explained how to build a simple remote controlled game scoreboard circuit with two digits for facilitating the user a hassle free changing of the digits remotely, during a game or a match. The idea was requested by Mr. Richard. Circuit Objectives and Requirements For our co-ed volleyball game we use […]