This ultrasonic remote control circuit can be used to switch and control any appliance ON/OFF through a relay in the receiver circuit. Written by: S.S. Kopparthy Using Ultrasonic Waves This circuit is a different one that uses ultrasonic sound waves whose frequency ranges from 40 KHz to 50 KHz. These waves can’t be heard by […]
Control
Simple RF Remote Control Circuit without Microcontroller
In this article I have explained how to make a simple RF remote control circuit using ready-made RF 433MHz and 315MHZ RF modules, and without incorporating microcontroler ICs. With the easy availability of RF modules today making an RF remote control has become a childs play. It’s all about procuring the RF modules ready made […]
Cellphone Display Light Triggered Remote Control Circuit
In this post I have explained a cell phone remote control circuit using the light from its display. The idea was requested by Dondon. Technical Specifications I need a circuit similar to the circuit above but I will use the LED of mobile phone as light source so I can turn ON and OFF the […]
RC Helicopter Remote Control Circuit
In this post I have explained a simple RC helicopter remote control circuit using 433kHz RF modules, without any microcontroller or complex joystick implementations. The idea was requested by Mr. Jitendra. Circuit Objectives and Requirements I am making a large scale RC helicopter. In which I am using 4 motors. For 1st main 12v motor: […]
Infrared (IR) Motor Remote Control Circuit
In this article I have explained a simple infrared (IR) remote control circuit which is configured for operating a DC motor in response to the switching made from a standard IR remote handset such as a TV remote or a DVD remote. The connected motor can be moved either ways and also can be made to halt. […]
How to Make a Remote Control Circuit from a Remote Bell
The proposed remote control circuit idea can be used for controlling any electrical gadget within a range of 100 meters. How the Circuit is Supposed to Work Since the idea here is to modify an existing circuit of a remote bell unit, becomes super easy without any complications. However the construction part does require the […]