An inverter is an equipment which will convert a battery voltage or any DC (normally a high current) into a higher mains equivalent voltage (120V, or 220V), however unlike an UPS inverters may lack one feature, that is these may not be able to switch from mains battery charging mode to inverter mode and vice […]
Newly Updated Circuit Projects:
Very Simple BLDC Motor Driver Circuits using Back EMF
In this post we investigate what’s a BLDC motor and subsequently I have explained regarding the design of a sensorless BLDC motor driver circuit. BLDC CPU Fans Seen those fast moving fans in CPUs, voltage stabilizers, DVD players, and other similar equipment, which work with utmost efficiency, consuming minimum space, current and yet are able […]
Simplest 100 Watt LED Bulb Circuit
In this article I have explained a very simple 100 watt LED bulb circuit using a few high voltage capacitors. The entire circuit could be built at a cost less than $25. I have already discussed many capacitive type of transformerless power supply circuits in this blog, however all these suffers from a couple of […]
Mini Transceiver Circuit
A transceiver is a wireless communication device which has its own transmitter and receiver units built-in for communicating with another similar device at some distant location. The user on both sides with the unit has to switch from transmitter to receiver and vice versa while speaking and hearing to each others conversation respectively. Introduction In […]
Traffic Light Controller Circuit [Signal Red, Green, Amber]
A traffic light controller circuit can be used for controlling the sequential illumination of the RED, ORANGE and GREEN traffic signal lamps, by maintaining appropriate delays between the illumination sequence. In real traffic signal light system we all have seen how the red, orange and green lamps switch ON/OFF in sequence with specific amount of […]
Ultrasonic Fuel Level Indicator Circuit
An electronic device or circuit which detects and indicates the various fuel levels in a fuel tank without a physical contact, through ultrasonic waves, is called an ultrasonic fuel level sensor In this post I have explained how to build a simple fuel tank level indicator circuit using Arduino and ultrasonic sensors. In every vehicle […]