In this article I have explained a generator/UPS/Battery relay changeover circuit for implementing a customized optimization for a generator, UPS, battery power network, in order to enhance the operational efficiency of the system. The idea was requested by Mr. Sidingilizwe. Circuit Objectives and Requirements First of all thank you for adding me to your circles. […]
Newly Updated Circuit Projects:
Timer Controlled Submersible Pumpset Circuit
In this post I have explained a timer circuit for submersible borewell pumpset which alternately switches the pumpset ON/OFF at a predetermined rate in order to allow the ground water sufficient time to restore at regular intervals and to ensure a consistent water supply to the attached overhead tank. The idea was requested by Mr. […]
IC 4060 Latching Problem [Solved]
The post talks about an IC 4060 timer circuit problem implemented in a coffee wending machine, in which the circuit simply stops working each time its stipulated delay period is lapsed, even after a complete power switch OFF and ON. The question was presented by Mr. Kenndy and was solved through the following email discussion: […]
Foolproof Laser Security Alarm Circuit
In this post I have explained a a simple yet versatile foolproof laser security alarm circuit which can be used for securing any concerned premise with extreme accuracy. The idea was requested by GPS. Circuit Objectives and Requirements Your circuits were very useful to me. Thanks for all your posts, but i wanted something different […]
Make this TV Remote Jammer Circuit
The proposed TV remote jammer circuit can be used for freezing and scrambling all TV remotes under the specified vicinity. How TV Remote Works As we all know the fundamental technology used in today’s TV or similar remote controls is Infrared (IR) light. The IR spectrum of light is invisible to the human eye, but […]
Infrared (IR) Motor Remote Control Circuit
In this article I have explained a simple infrared (IR) remote control circuit which is configured for operating a DC motor in response to the switching made from a standard IR remote handset such as a TV remote or a DVD remote. The connected motor can be moved either ways and also can be made to halt. […]