This solar LED light trap circuit for insects can be used to attract insects at night and keep them engaged with the light source. This distraction created by the LED light will keep the insects from flying towards the crops and save the crops from these harmful pests. The circuit design was requested by Mr. […]
Newly Updated Circuit Projects:
How to Connect and Use RCWL-0516 Microwave Motion Sensor
In this article I will comprehensively explain about the RCWL-0516 a microwave proximity motion sensor which uses Doppler radar. Here, I will elucidate the following points: What is RCWL-0516 It is yet another type of proximity motion sensor which can detect if someone has entered into an area, and raise an alarm or take an […]
3 Tested 220V High and Low Voltage Cut OFF Circuits Using IC LM324 and Transistors
An AC mains high/low cut-off device will cut off or disconnect the mains supply from home electrical whenever a high voltage or low voltage situation is detected. In this way it ensures total safety to the home wiring and appliances from fire hazards, due to abnormal over voltages, brown outs or low voltages. In this […]
AC Light Dimmer Circuit
In this post I have explained through two examples how to build a simple110 V or 220 V AC light dimmer circuit for controlling light intensity with pot, using the principle of triac phase chopping. A 220V dimmer switch circuit is basically a triac/diac based AC mains voltage regulator circuit which can be used for […]
Use this Battery for 50 Years without Charging
A novel battery technology, developed by Beijing-based firm Betavolt, has been introduced. It boasts an astounding 50-year lifespan without the need for maintenance or charging. With 63 radioactive isotopes contained in a module the size of a penny, this ground-breaking nuclear battery is a leader in the field of atomic energy miniaturization. https://twitter.com/Byron_Wan/status/1746801325722239367/photo/1 Advancements in […]
Switching OFF Lights in a Periodic Sequence
In this post I have explained a circuit that will switch off a group of lamps in sequence with a predetermined delay rate, as set by the user through a built in pot. The ideas was requested by Mr. Azam Jamal Technical Specifications I want to make a circuit which works like: I have 9nos […]