In this post I have explained an innovative circuit modification which allows a single common lamp to be used as a parking light, turn signal indicator light, as well as a side marker light on the relevant positions. The idea was requested by Mr. Chris Technical Specifications I have a project that is slightly related […]
Turn
2-Pin Motorcycle Turn Signal Flasher Indicator Circuit with Buzzer
A simple construction procedure of a motorcycle electronic 2 pin turn signal indicator with beeper circuit has been thoroughly I have explained in this article. Normally, the electro-mechanical types of turn signal indicators are not reliable due to low consistency and vulnerability to changing weather conditions. The present design easily withstands the above parameters and […]
Sequential Bar Graph Turn Light Indicator Circuit for Car
The article illustrates a simple yet innovative, fancy car turn signal light circuit which produces a rising bar graph sequence effect when switched ON. The circuit idea was requested by Mr. +Bruce Lowry. I have explained more. Technical Specifications I am after a circuit design similar to the LED Bar Graph circuit that is found […]
Car Turn Signal Flasher Circuit with Lamp Malfunction Indicator
In this post I have explained an automotive/car turn signal indicator circuit idea with a built-in load malfunction indicator, meaning an additional LED lamp fitted on the dashboard which would warn if any of the side indicators went bad or fused. The idea was researched and requested by Mr. Abu-Hafss. The Circuit Concept I have found a transistor-based flasher including a […]
Lamp Outage Detector Circuit for Car Turn Signal
The O.E.M. turn signal flashing units installed in automobiles have two basic functions i.e. Flasher and Lamp outage detection. These flashers are usually built with an 8-pin IC like U2044B, U6432B etc. which are specifically made for automotive flashers. Designed and Written By Abu-Hafss Circuit Operation These flashers normally oscillate at about 1.4Hz. When a […]
3-Pin Solid-State Car Turn Indicator Flasher Circuit – Transistorized
Although, most of the car electronics have evolved into solid-sate versions, a turn indicator flasher unit is one device which still depend on a relay based design in many of the modern cars. Disadvantages of Relay Based Flasher There are a couple major disadvantages of a relay based electromechanical flasher unit: 1) First, these being […]