In this post we are going to learn one very interesting and also very much useful topic that is how we can measure the current which is going through any load by just using some normal resistors and one op amp circuit. We know already that current is one very important thing in every electrical […]
Side
Isolated High Side Gate Driver Opto-Coupler HCPL3120: No need of Bootstrapping Capacitor/Diode
In this article I will be talking about this device that we call HCPL3120 or also J312, and we see that it is an isolated gate drive opto coupler which we can use for driving H-bridge MOSFET and IGBT gates safely from the low voltage logic side to the high voltage power side. It has […]
Modifying Car Turn Signal Lights, Park-Lights and Side-Marker Lights
In this post I have explained an innovative circuit modification which allows a single common lamp to be used as a parking light, turn signal indicator light, as well as a side marker light on the relevant positions. The idea was requested by Mr. Chris Technical Specifications I have a project that is slightly related […]
Customizing Car Side Marker Lights to Flashing Side Markers
In this article I have explained a car side marker modification which enables it to respond to the existing turn signal pulses and flash in tandem with the turn signal flashing. The idea was requested by Mr. Jerry Klein. Technical Specifications I have a 1990 automobile which I believe does not have very sophisticated circuitry […]