In this post I have explained an easy method of upgrading your existing car fog lamp switch such that it allows toggling both the fog lamp as well as the DRL lamps alternately, as per the owner’s requirement. The idea was requested by mk karthick. Circuit Objectives Am looking for a circuit which is directly connected […]
Newly Updated Circuit Projects:
Touch Operated Code Lock Switch Circuit
This touch operated electronic door lock can be used for locking any entrance through a touch keypad. The lock’s touch feature is foolproof and impossible to crack since the touch function is required to be on 3 programmed pads together or simultaneously, otherwise the lock doesn’t respond. It is a lot convenient to open a […]
Long Range Transmitter Circuit – 2 to 5 Km Range
The proposed long range transmitter circuit really is very steady, harmonic free design which you can use with standard fm frequencies between 88 and 108 MHz. Technical Specifications of the Transmitter This will likely encompass 5km spectrum (long range). It includes an extremely consistent oscillator for the reason that you employ LM7809 stabilizer that is […]
Cellphone Low Battery Cut-off with Indicator Circuit
In this post I have explained a simple yet effective low battery cut-off with indicator circuit which can be integrated with cell phone/tablet charger battery packs in order to monitor and avoid battery draining below a set threshold. The idea was requested by Mr. David. Technical Specifications Hi Swagatam. I know it was asked before, […]
Car Warning Tone Generator for Ignition, Headlight, Turn Lights
The circuit explained here is basically a warning signal generator designed largely for automobile application. It triggers a warning signal in a situation when the turn indicator switch is not restored back to its neutral status. The circuit is especially useful for all those cars where the turn indicator system is not supported with an […]
Refrigerator Motor Soft Start Circuit
Refrigerators tend to draw appreciable amounts of current each time their compressor switch ON, and this could happen many times per day. A soft start circuit to the compressor motor could probably tackle this issue and help save electricity. The idea was requested by Mr. Naeem Khan. Technical Specifications I need your help regarding to […]