Video showing the Testing of TSOP1738 with 38 kHz Frequency The TSOP17XX series of ICs are infrared sensor devices designed for sensing infrared frequencies only with a specific range of modulated frequency, and interpreting them into a proportionate magnitude of electrical pulses at the output. This is specifically done to make the sensor immune to […]
Newly Updated Circuit Projects:
Low Power MOSFET 200mA, 60 Volts Datasheet
In this post I have explained the main specs and pinouts of a small signal, low power N-channel mosfet 2N7000G. Mosfets vs BJTs When we talk of mosfets we normally associate it with high current, high voltage, and with high power applications. However, just like ordinary BJTs, small signal mosftes are also available which may […]
Compact 3-Phase IGBT Driver IC STGIPN3H60 – Datasheet, Pinout
In this post I have explained the datasheet, and the pinout specification of the IC STGIPN3H60 from ST microelectronics, which is perhaps the slimmest and the smartest 3-phase IGBT driver IC featuring in-built IGBTs, rated to work with 600V DC bus and upto 3 amp current, that’s equivalent to almost 1800 VA handling power. 3-Phase IGBT […]
Types of Switches, Working and Internal Details
One of the key elements used in the industry of the electronics is the switches. The various different types of tasks for which the switches are used include providing the power supply to a circuit and selection of a specific element for the circuit which will be used in a given specific application or operation. […]
Types of Resistors and their Working Differences Explored
The industry of electronic circuits uses resistors of various different types available in the market. The properties of these resistors vary and are different for each type being ruled by their manufacturing and construction process. By: S. Prakash Over a time period, the resistors of various types which were and are being used in the […]
Standard Resistor E-series Values
The resistor’s values which are provided to them fall within a category of standard or preferred resistor values. By: S. Prakash The values present within the standard resistor category are in sequence which is logarithmic and are in correspondence to the accuracy of the component. This enables the values present within the standard resistor category […]