The electric fence charger circuit presented here is basically a high voltage pulse generator. The super high voltage is derived from a commonly used automobile ignition coil. An astable multivibrator is used to generate the required frequency to drive the ignition coil. Another astable is used to control the pulses supplied to the fence. Protecting […]
Security and Alarm
Door Security Alarm Circuit for Alerting if Door was Opened
The door security alarm circuit discussed in this article alerts the user whenever the door fitted with the circuit is opened or closed or even moved from its original locked position. Using a Reed Relay and Magnet for the Triggering The idea utilizes the very basic reed relay and magnet concept across the door and […]
Footsteps Detector Circuit
By sensing vibrations from footfall, a Footsteps Detector Circuit is a creative and affordable approach for catching intruders. It employs a simple setup with a low-cost loudspeaker and a mute switch to pick up even the smallest steps. This simple circuit is excellent for enhancing building and garden security. We’ll go through the fundamental components […]
Touch Alarm Circuit
The touch alarm circuit senses the mains hum signal from an intruder’s body and raises the alarm sound. This happens whenever an intruder touches a potential element set as the sensor, such as the door knob, or any object that needs to be protected. If the circuit is linked with the door knob, the circuit […]
Shock Vibration Detector Circuit using 801S Sensor
The shock alarm module that we are presenting to you can be used in a house as well as in a car. Given its low manufacturing cost, it can be replicated in several copies and connected to different positions at home. It can be also installed in a vehicle where it will trigger a siren […]
Child Crying Monitor Circuit using Power Line Communication
In this child crying monitor circuit when the baby wakes up in their room, the parents are immediately notified, even if they are in another room of their home. A sensor detects the crying sound accompanying the wake-up. After appropriate processing, it sends a signal through the 220V power lines. The receiver, connected to any […]





