In this post I will show how to construct a circuit for an Electronic Voting Machine using Arduino and SD card module where the election data is stored in the SD card. UPDATE: This circuit has been upgraded to an improved version in which the results can be viewed over an attached LCD display, you […]
Module
Interfacing SD Card Module for Data Logging
In this post we are going to interface SD card module with arduino for data logging. We will see overview of SD card module and understand its pin configurations and on board components. Finally we will be constructing a circuit to log the temperature and humidity data to SD card. Secure Digital Card SD card […]
Mobile Phone Controlled Robot Car Using DTMF Module
In this project we are going to control a manual robot through our cellphone using DTMF module and Arduino. By: Ankit Negi, Kanishk Godiyal and Navneet Singh sajwan INTRODUCTION In this project two cell phones, one for calling and one for receiving the call are used. The phone receiving the call is connected to the robot […]
L298N DC Motor Driver Module Explained
In this post I have explained about L298N dual H-bridge DC motor driver module which can be used to drive brushed DC motors and stepper motors with microcontrollers and ICs. Overview Modular circuit boards are best time savior for electronics designers which also reduce the prototyping errors. This is mostly preferred by programmers who write […]
Introduction to I2C LCD Adapter Module
In this post we are going take a look at “I2C” or “IIC” or “I square C” based LCD adapter module, which will reduce wire connections between Arduino and LCD display to just 2 wires, also saving tons of GPIO pins for other sensors / drives etc. Before I have explained about I2C LCD adapter […]
DC-DC Boost Module (0.9V~5V) to 5V 600mA USB Step-up Board
So this is a DC-DC boost converter that takes a low voltage (0.9V to 5V) and steps it up to a stable 5V. We use this when we have a small battery, but we need 5V output, like for USB devices. It is super useful for battery-powered projects and small electronics. Main Features How It […]