The post presents a couple of simple LED intensity controller circuit which may be appropriately configured for specific related applications. The idea was requested by Mr. Chand. Technical Specifications I would like to have a circuit designed by you which is very simple and straightforward. This will be incorporated as a stand alone feature in […]
Newly Updated Circuit Projects:
Compatible LED Tube Light Circuit for Standard Ballast Fixtures
In this article we will study a simple LED tube light circuit which could be directly replaced with faulty 40 watt T17 fluorescent tubes and fitted directly on the existing fixture. Thus the circuit is compatible with all standard iron ballast fixture assemblies. How Conventional Fixtures are Wired As shown in the below diagram, traditional […]
Greatest Myths about LED Lighting
LED lighting products are relatively new for the commercial market and as with any new product, they have to deal with doubt and negative comments from consumers’ side. There just is a lot of false information about LED lights that creates many misconceptions about them. So here are the greatest myths about LED lamps and […]
Making a Regulated 9V Battery Eliminator Circuit
The post presents a regulated 9V battery eliminator circuit which was built and investigated by Mr. Steven Chiverton, an avid reader of this blog and an experienced electronic hobbyist. I have explained more from him. 9 volt battery eliminator circuit tests: Circuits built 2x each circuit ive made a small modification to it buy adding […]
Using Microwave Oven Parts to build a Soldering Iron Heat Controller
In this post I have explained how to scavenge discarded microwave oven parts for making a useful soldering iron heat controller circuit which can then be used for maintaining controlled heat over a connected soldering iron tip ensuring safe soldering operations, that may be quite crucial and handy if you are working with SMD parts. […]
Dual A/C Relay Changeover Circuit
In this post I have explained a simple relay changeover circuit which may be used for switching a couple of A/Cs or any similar load alternately in order to avoid misuse and save power. Technical Specifications Here is the situation: State: California. Facility: Church. The electric rate is greatly influenced by peak usage in any […]