The following post discusses a simple hum filter circuit which can be installed between an audio input source and a power amplifier, so that any possible mains hum frequency within the audio signal is blocked and only the clean audio frequency is allowed to go through. Introduction As the name suggests, hum noise is in […]
Amplifiers
Dummy Load Circuit for Testing Power Supplies and Amplifiers
In the following post I have explained two straightforward dummy load circuits: the first one can be used for testing high current power supplies, and the second design can be used for testing large power amplifiers. Suppose you have a 10 amp power supply and you want to confirm the 10 amp output through some […]
Selecting Power Supply for Car Amplifiers
The following discussion informs us regarding how to select the right power supply for a car amplifier which needs to be operated at home. The questions were raised by Mr. Gyaneshwar Singh. Questions and Answers Regarding Selecting Car Amplifier Correctly Question: Thanks for creating awareness on your own concept and resolving problems of others. I am […]
SMPS 2 x 50V 350W Circuit for Audio Power Amplifiers
This article will illustrate a simple procedure to devise an unregulated 50V switching SMPS symmetric power supply of 350W. This unit can be substituted with the standard audio amplifier power supply to reduce expense and also the weight. The proposed power supply works as a half-bridge with no regulation. Written and Submitted by: Dhrubajyoti Biswas […]