This first part of the proposed 4kva synchronized stackable inverter circuit discusses how to implement the crucial automatic synchronization across the 4 inverters with regards to frequency, phase and voltage to keep the inverters running independent of each other yet achieving an output that’s on par with each other. The idea was requested by Mr. […]
Inverter Circuits
Arduino Modified Sine Wave Inverter Circuit
In this post I will show how to construct a modified sine wave inverter using Arduino. We will explore the methodology of the proposed sine wave inverter and finally, we will take a look at simulated output of this inverter. By Difference Between Squarewave and Modified Squarewave Inverter Inverters saved us from short term power […]
Automatic Inverter Fan Switch ON while Charging and Inverting Modes
In this post I have explained a simple method of automatically switching ON an inverter fan whenever the unit is operating in the charging mode or inverter mode, in order to ensure optimum cooling of the internal power devices. The idea was requested by Mr. Sudip Bepary. Circuit Objectives and Requirements I have just bought […]
500 Watt Inverter Circuit with Battery Charger
In this post we will comprehensively discuss how to build a 500 watt inverter circuit with an integrated automatic battery charger stage. Further in the article we will also learn how to upgrade the system for higher loads and how to enhance ot into a pure sine wave version. This 500 watt power inverter will […]
How to Make an ATX UPS Circuit with Charger
In this post I have explained a simple ATX UPS circuit with an automatic charger for enabling an automatic changeover from mains to battery power during mains failures and for ensuring an uninterruptible operation of the ATX load. Technical Specifications I´m interested in your site and there are a lot good ideas. But for my […]
SPDT Relay Switch Circuit using Triac
An efficient solid state single pole double throw or SPDT switch can be built using triacs for replacing a mechanical SPDT. In this post I have explained a simple solid state triac SPDT relay circuit, using an optocoupler and a couple of triacs, which can be used as an effective replacement for mechanical relays. The […]