In this post I have explained how to build a battery deep discharge protection circuit which can be used for protecting any type of battery from over discharge through a connected load. Normally, we are mostly worried about battery getting over charged, and forget about a situation where the battery can get over discharged by […]
Newly Updated Circuit Projects:
Making a Single Channel Oscilloscope using Arduino
In this interesting post, we are going to make a simple single channel oscilloscope using Arduino and a personal computer, where the waveforms will be showcased on the PC’s display and frequency and time period of the input waves will be displayed on the 16 x 2 display. Introduction Every electronics enthusiast once said “I […]
Electronic Voting Machine with SD Card Module
In this post I will show how to construct a circuit for an Electronic Voting Machine using Arduino and SD card module where the election data is stored in the SD card. UPDATE: This circuit has been upgraded to an improved version in which the results can be viewed over an attached LCD display, you […]
Programmable Humidity Controller Circuit
The simple programmable humidity sensor circuit I have explained in this article can be used for controlling or maintaining a suitable level of humidity inside a close premise. The circuit could be used in poultry farms or similar areas where humidity level becomes crucial for keeping the animals healthy. The idea was requested by Mr. […]
Automatic Irrigation Circuit using Arduino
In this post I will show how to construct an automated water irrigation system for small garden using arduino and soil moisture sensor. Introduction The proposed system can monitor the soil moisture level and when soil moisture goes below preset value, the 12V DC pump will be triggered for predetermined period of time. The status […]
Interfacing SD Card Module for Data Logging
In this post we are going to interface SD card module with arduino for data logging. We will see overview of SD card module and understand its pin configurations and on board components. Finally we will be constructing a circuit to log the temperature and humidity data to SD card. Secure Digital Card SD card […]