In this post I have explained the construction of a homemade 100 watt capacitive tubelight circuit using 1 watt LEDs. The idea was requested, constructed, tested and verified by one the avid readers of this blog Mr. Tamam. Let’s go through the entire discussion. Discussing the Proposed The Design I regularly visit your blog, and […]
Archives for 2014
Light Dependent LED Intensity Controller Circuit
In this post I have explained a simple ambient light dependent LED illumination controller circuit. The light fades or intensifies proportionately i response to the ambient light conditions. With brighter daylights, the LEd illumination gets softer and vice versa. The idea was requested by one of the dedicated members of this blog. Technical Specifications While […]
LED Brightness and Efficiency Tester Circuit
In this post I have explained a simple LDR brightness and efficiency tester circuit set up using an LDR and a digital Ohm meter. The idea was requested by Mr. Prashant Technical Specifications I want to check brightness and light of 1 watt led. Can i check it with help of ldr. Bekoz luminous sensor […]
Greenhouse Motorized Water Diverter and Humidity Controller Circuit
In one of the previous posts I have explained the making of a greenhouse temperature controller circuit, here we study how the effects may be enhanced through an automatic water valve actuator and humidity controller circuits. The idea was originally requested by Mr. Leandros Komninos Technical Specifications Found one on ebay, these are the detail […]
Make this Red LED Sign Circuit
The post presents a simple transformerless red LED sign circuit which can be made even by a novice. The circuit uses only a few high voltage capacitors, two resistors, and a few red LEDs…. nothing more. The circuit idea and the images were submitted by Mr. John Hungerford. The following email was sent to me […]
Blinking an LED with Arduino – Complete Tutorial
The post comprehensively discusses a basic Arduino code implementation guide for blinking its on-board LED. The data was built, tested, and written by Jack Franko. CODE: for simply inbuilt LED on pin 13 of ARDUINO BOARD by default it is programed to blink frequently at 50 Mili Seconds as it in description it will […]