In this post I have explained a simple yet very useful 0 to 50V dual power supply circuit which will enable a full 0 to maximum dual voltage +/- control of the input power supply DC. It also includes a wide range current control feature right from 0 to 10 amps. The idea was requested […]
Power Supply Circuits
Adjustable 0-100V 50 Amp SMPS Circuit
The high power adjustable switching power supply is perfect for the purpose of laboratory work. The topology used to design the system is switching topology – half controlled bridge. Written and Submitted by: Dhrubajyoti Biswas Warning: The following circuit design works with a direct 220 V Mains AC without any isolation at the input side, […]
SMPS Halogen Lamp Transformer Circuit
One of the best substitutes for traditional light transformer for halogen bulbs is the electronic halogen transformer. It can also be used with non-halogen bulbs and any other form of resistive loads that does not run on RF current. Written and Submitted By: Dhrubajyoti Biswas Halogen Lamp Working Principle The electronic halogen lamp transformer works […]
SMPS Welding Inverter Circuit
If you are looking for an option to replace conventional welding transformer, the welding inverter is the best choice. Welding inverter is handy and runs on DC current. The current control is maintained through potentiometer. By: Dhrubajyoti Biswas Using Two Switch Topology When developing a welding inverter, I applied forward inverter with two switches topology. […]
SMPS 2 x 50V 350W Circuit for Audio Power Amplifiers
This article will illustrate a simple procedure to devise an unregulated 50V switching SMPS symmetric power supply of 350W. This unit can be substituted with the standard audio amplifier power supply to reduce expense and also the weight. The proposed power supply works as a half-bridge with no regulation. Written and Submitted by: Dhrubajyoti Biswas […]
SMPS 50 watt LED Street Light Driver Circuit
The post presents an SMPS based LED street lamp driver circuit which can be used for driving any LED lamp design right from 10 watts to 50 watts plus. Using the IC L6565 The proposed 50 watt (and higher) LED street light driver circuit uses the IC L6565 as the main control device, which is […]