Many people build inverter using EGS002, then they ask can we connect normal 16×2 LCD or not?? So the answer is yes, but not the way you may think. Understanding LCD Side Of EGS002 As we all know EGS002 is built around EG8010. That chip is dedicated SPWM sine wave inverter controller IC, which handles […]
Standard
Standard Resistor E-series Values
The resistor’s values which are provided to them fall within a category of standard or preferred resistor values. By: S. Prakash The values present within the standard resistor category are in sequence which is logarithmic and are in correspondence to the accuracy of the component. This enables the values present within the standard resistor category […]
Compatible LED Tube Light Circuit for Standard Ballast Fixtures
In this article we will study a simple LED tube light circuit which could be directly replaced with faulty 40 watt T17 fluorescent tubes and fitted directly on the existing fixture. Thus the circuit is compatible with all standard iron ballast fixture assemblies. How Conventional Fixtures are Wired As shown in the below diagram, traditional […]