Power Supply Circuits

You may have often wondered whether it was feasible to get higher voltages than 12 V from a 7812 IC? In this short post I have explained how to configure the IC 7812 with a BJT stage, so that its output can be made variable for achieving any desired voltage higher than 12 V, without […]

In this post I have explained how to make simple yet fully stabilized and regulated, variable power supply circuits using the IC 741 op amp. Three versions of the 741 power supplies are I have explained below: Simple Variable IC 741 Power Supply The first figure below exhibits a IC 741 based simple variable voltage […]

In this article I have explained how to build a highly efficient voltage regulator circuit using an SCR and some other external components. This SCR voltage regulator circuit being a switching kind of regulator is more efficient than the normal 3 pin voltage regulators, or the transistor zener based series pass regulators circuits. How the […]

A DC to DC converter is basically a switch-mode power supply, designed to work either as a boost-converter to step-up a low voltage DC to a higher voltage DC, or as a buck-converter to step-down a higher voltage DC to a lower voltage DC. The switched mode conversion ensures that the power transfer in the […]

In this post I have explained how an effective and efficient, yet very cheap, and stabilized bench power supply can be designed by any electronic hobbyist for safely testing all types electronic projects and prototypes. The main features that a bench power supply must have are: General Description The majority of the power supply designs […]

In this post I have explained a simple way to enhance the the XL4015 DC to DC buck converter with an adjustable current limiter, which seems to be missing in the original module. About XL4015 The XL4015 is a 180 KHz fixed frequency PWM buck (step-down) DC/DC converter, specially designed for operating a 5 V, […]