In this post I have explained a simple 3 phase solar submersible pump inverter circuit which can be made by configuring a few ICs and a few power devices. The idea was requested by Mr. Lufono and Mr. Sami. Circuit Objectives and Requirements First of all i must say thanks to you and Mr. Lufono, […]
Submersible
Timer Controlled Submersible Pumpset Circuit
In this post I have explained a timer circuit for submersible borewell pumpset which alternately switches the pumpset ON/OFF at a predetermined rate in order to allow the ground water sufficient time to restore at regular intervals and to ensure a consistent water supply to the attached overhead tank. The idea was requested by Mr. […]
Remote Controlled Submersible Pump Circuit
In this article I have explained a simple remote controlled submersible pump circuit which could be simply configured using any standard 2 channel 433MHz remote control modules. The idea was requested by Mr. James Smith Circuit Objectives and Requirements I have read a lot of your post and have successfully implemented them several times. Now […]
Submersible Pump Start/Stop Circuit
In this post I have explained an automatic submersible pump start, stop circuit with dry run protection in order to implement an automatic ON/OFF switching of the motor in response to the high/low water levels of the overhead tank. Circuit Concept In one of the previous posts I have explained a similar concept which also […]
Control Two Submersible Pumps Alternately
In this post I have explained a simple water level controller circuit applicable for automatic toggling of two submersible water pumps alternately in response to a predetermined water level switching. The entire circuit is built using just a single IC and a few other passive parts. The idea was requested by one of the interested members of […]