This passive PFC calculator does not use any MOSFET or PWM or switching frequency. It only uses 50 Hz mains and it only works with inductors and capacitors, so the only thing that matters is the reactance of the inductor and the reactance of the capacitor at the mains frequency. That is why the calculator […]
PFC
Calculator to Design a High Power 3kW PFC (Power Factor Correction) Circuit
In this post I will explain how to use this active PFC calculator for calculating high current, high PFC designs. In our example we will be using 230 VAC input and 3 kW output and Vout equal to around 390 V, and we will try to see how each resistor and capacitor gets calculated in […]
Power Factor Correction (PFC) Circuit – Tutorial
In this post I have explained the different methods of configuring a power factor correction circuit or a PFC circuit in SMPS designs, and explains the best practice options for these topologies so that it complies with the modern PFC restriction guidelines. Designing efficient power supply circuits have never been easy, however in the course […]
Designing a Power Factor Correction (PFC) Circuit Using UC3854 – Key Considerations
The IC UC3854, what it does is, it helps in active power factor correction, right? Now normally, if we don’t correct the power factor, then power system will pull current from the AC mains in a way that’s not a nice sine wave but rather distorted. This IC takes care of all the control stuff […]